Filter
Top Products
PWM-F110
Installation Manual Page - 12 -
7. Level and secure the plate to the wall with the reference arrow facing up to the ceiling.
8. Secure the plate using the eight (8) 5/16" lag bolts and flat washers (supplied) – (Figure 13).
CAUTION: Do not over tighten the lag bolts.
NOTE: Use a minimum diameter of 5/16” x 3” long wood screws.
Figure 13
NOTE: Although not depicted in the illustrations shown above, the width of this wall mount will encompass
four wall studs (three wall studs if 24” apart).
5/16" x 3" lag
bolts and (4) flat
washers (4ea)
Wall Plates
Level