Filter
Top Products
PWM-F110
Page - 8 - Installation Manual
3. If needed, install the nylon spacers to the mounting points on the flat panel (Figure 3).
4. Lay the left and right mounting brackets (stamped arrows facing out) - (Figure 4).
Figure 3 Figure 4
5. Match the center of viewing guide with the centerline you marked in step 1 (Figure 5).
6. The mounting brackets are designed with a center of viewing guide on the side of them (Figure 6).
Nylon Spacers, If Applicable
Inverted Flat Panel
Center Mark
Mounting Brackets
Bottom of Flat Panel
Arrows Facing Out