Filter
Top Products
8 PRESTIGIO P400MW / P460MW
ENG
Connection to External equipment
-You can connect additional equipment, such as VCRs, camcorders etc. to your set. However please check with your
manufacturers instruction books for specific information. Make sure all connections are made with both your set and
additional appliance unplugged from the mains to avoid damaging your equipment. Here shown may be somewhat
different from your set.
1 Connect to Aerial socket
Connect the RF out socket of the VCR to the aerial socket on the
back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using the
‘Manual programme tuning’ section.
Select the programme number where the VCR channel is stored.
Press the PLAY button on the VCR.
2 Watching VCR
- If you connect an S-VIDEO VCR to the S-VIDEO input, the
picture quality is improved; compared to connecting a regular
VCR to the Video input.
- To avoid picture noise (interference), leave an adequate
distance between the VCR and set.
Use the INPUT SELECT button on the remote control to select
AV1, AV2, AV3, AV4 or S-VIDEO.
(If connected to S-VIDEO, select the S-VIDEO external input
source.)
Insert a video tape into the VCR and press the PLAY button
on the VCR. (See VCR owner’s manual)