Filter
Top Products
13
2
LOCATION AND FUNCTION OF CONTROLS
1. OPEN BUTTON
Press the OPEN button to fold down the front control panel.
Then a CD can be inserted into the CD slot or ejected by pressing the EJ
button at the back of the front control panel.
2.3. SEL BUTTON (Select) AND VOL(MENU)+/- KNOB
a) Press the SEL button briefly to select the mode of sound mode item by
item, such as VOLUME, BASS, TREBLE, BALANCE and FADER.
Now the settings of them can be adjusted by rotating the VOL + /- knob.
(Note: If equalizer settings such as POP and JAZZ have been selected
in DSP, it is impossible to change to BASS and TREBLE.)
b) Press the SEL button and hold for more than 1 second to access the
menu mode. Now press the SEL button briefly to select the menu mode
as follows: DSP (DSP OFF / POP M / JAZZ M / CLASS M / FLAT M),
BEEP ON/OFF, SEEK 1/2, VOL LAST/ADJ.
SPECIFICATION
GENERAL
Supply Voltage DC 13.8V. Negative Ground
Current Consumption Max.10A
Power Output 25W X 4.
Unit Dimensions 178[W] X 165[D] X 50[H] mm.
FM SECTION
Frequency range 87.5MHz -107.9MHz
Effective sensitivity 3uV.
I.F Frequency 10.7MHz.
AM SECTION
Frequency range 530KHz - 1710KHz
Effective sensitivity 40dB.
I.F Frequency 450KHz
RCA LINE OUT (OPTION)
Output CD Max. 1200mv
CD PLAYER
System Compact Disc Audio System.
Suitable CDs CD/CD-R/CD-RW/MP3 Disc
Signal format Sampling frequency 44.1KHz.
NO. of quantization bits 1bit.
Frequency characteristics 20-100Hz < 5dB
\
10-20KHz < 5dB.
\
S/N Ratio to CD 50dB [1KHz]
Number of channels 2 STEREO channels.