Filter
Top Products
16
OPERATION
BASIC OPERATION
SWITCHING ON/OFF THE UNIT
Press PWR button on the front panel or
POWER button on the remote control
to turn on the unit.
FACEPLATE RELEASE
Press button on the front panel to
detach the removable faceplate.
SOUND ADJUSTMENT
Press SEL button on the front panel of
the unit or on the remote control to
select the desired adjustment mode.
The adjustment mode will change in the
following order:
VOL BAS TRE BAL FAD
(Volume) (Bass)
(Treble)
(Balance) (Fader)
By pressing the VOL /VOL buttons
on the front panel or VOLUME +/-
buttons on the remote control, it is
possible to adjust the desired sound
quality.
LOUDNESS
Press and hold BND/LOU button on the
font panel for several seconds or press
LOUD button on the remote control to
reinforce the bass output. Press
BND/LOU button on the font panel for
several seconds again or press LOUD
button on the remote control again to
release this function.
SET THE CLOCK
Press the DSP button on the front panel,
the clock is shown on the LCD display.
Then hold down the button until the
clock flashes. Then press the VOL
button on the front panel or VOLUME +
button on the remote control to change
hours; press VOL button on the front
panel or VOLUME button on the remote
control to change minutes.
MUTE
Press MUT button on the front panel or
MUTE button on the remote control to
mute down the sound instantly. Pres it
again to resume sound output.
EQUALIZATION
Press EQ button shortly to turn on
equalization function and to select
desired audio mode. There are three
kinds of mode as below:
CLAS POP ROCK
MODE SELECTION
Press MOD button on the front panel of
the unit or MODE button on the remote
control to select among radio, disc
(DVD/VCD/CD/MP3) play mode and
AV IN mode.
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display of the front
panel.
FLASHING LED
If the front panel does not install in the
main unit, the LED will be flashing.
REMOTE SENSOR
Point the remote control handset to the
remote sensor RX. Press the function
keys on the handset to control the
system.
RESET FUNCTION
RESET button on the housing must be
activated with either a ballpoint pen or
thin metal object. The RESET button is
to be activated for the following reasons: