Filter
Top Products
Signal Quality
There are several items to indicate the signal quality including signal strength, AGC, SNR,
lock status and threshold errors.
After accessing the Channel sub-menu, use the navigation buttons to highlight the Signal
Quality option, and press the ENTER button to select it. The Signal Quality window will appear,
as shown in Figure 10 below. A dot will appear to the left of the current signal quality selection.
Figure 10. Signal Quality Window
14
4. Menu Operation
Use the navigation buttons to highlight the desired setting and press the ENTER button to
select it. When the signal quality is in on option, the signal quality will be displayed as the OSD
main menu is not active. The window is shown as the Figure 11 below.
Figure 11. Signal Quality Window