Filter
Top Products
Remote Control
11 Programming Macros
PROGRAMMING MACROS
The Guide Remote* has two hard keys for programming macros. Program each macro
key to send one command containing up to 32 keystrokes.
RECORDING MACRO
Perform these steps to program macros.
1. Press any device key (TV, VCR, CBL/SAT or DVD). The red light blinks one time.
2. Press the P key. The red light blinks one time.
3. Press Macro Key 1 or 2. The red light blinks 3 times.
4. Press the desired keys (TV, VCR, POWER, CH +, PLAY, etc.) associated with the
macro you want the remote to execute. The red light blinks one time for each key
press.
5. Press the P key. The red light blinks three times.
NOTES:
• Press the LIGHT key to add ½ second delays. Each press of the LIGHT adds a ½
second delay.
• If your original remote control requires you to press Enter, Select or any other command,
press ENTER after entering the channel number.
• Repeat Steps 1-4 above to assigning a new macro to either MACRO key. The previous
macro will be overwritten.
PLAYING MACRO
To play a macro, press the appropriate MACRO key.
If you want to add another macro to the second macro key, repeat the above steps and
substitute the desired key sequence for the macro you wish the remote to perform.
PUNCH-THROUGH
The Punch-Through feature lets you control two or more different devices without having
to press the device keys for each one. For instance, with Punch-Through enabled, you
can control the TV and/or VCR volume through your Cable converter. Punch-Through is
always on unless you disable it.