Filter
Top Products
Need help? Call
1-800-950-7044!
14
7. To exit the fast search mode, press
SET UP
.
Note:
You can search up to 11 codes for a particular
device (TV, VCR, cable, and so on).
Channel Scan
The channel scan feature lets you scan through all
channels on your TV, VCR, or cable box, stopping at
each channel for about 3 seconds.
To scan through available channels, first press the de-
vice key (
TV
,
VCR
, or
CBL
). Then aim the system’s re-
mote control at the device and press
SCAN
. The 6 in 1
system automatically scans through available chan-
nels. To stop scanning, press any key on the remote
control.
Note:
If you are not using the command module, the re-
mote control must be pointed at the device the entire
time you use channel scan.
Favorite Channel Scan
The Favorite Channel Scan feature lets you set up your
system’s remote control to scan through a list of up to
10 channels you select.
Follow these steps to set up a list of your favorite chan-
nels.
1. Press the desired device key (
TV
,
VCR
, or
CBL
).
2. Press and hold down
SET UP
until the red indica-
tor blinks twice.
3. Release
SET UP
and press
9 9 6
.
4. Enter the number of the first channel, then press
and release
SET UP
.
For example:
0 9 SET UP
(for Channel 9)
1 2 SET UP
(for Channel 12)
1 4 SET UP
(for Channel 14)
15-1919.fm Page 14 Monday, July 19, 1999 12:34 PM