Filter
Top Products
Need help? Call
1-800-950-7044!
20
To control specific lamps and appliances directly
from the RF command console, press the top but-
ton of the corresponding module number (
1
,
2
,
3
,
4
or
5
,
6
,
7
,
8
) to turn on the module. Press the bot-
tom button to turn off the module.
6. To brighten or dim lights connected to lamp and
wall switch modules, turn on the specific module
(as described in Step 5). Then press and hold
Brt
or
Dim
on the system’s remote control (or
BRIGHT
or
DIM
on the RF command console). Release the
key when the desired brightness is reached.
Note:
You must turn lights on individually to use
the dimmer. It does not work if you turned all the
lights on at the same time from the system’s
remote control or RF command console.
7
4
5
8
CH
6
9
DISPLAY
PROG TV/VCR
LAST
ENTER
ALL
OFF
MUTE
Off
SCAN
Brt
VOL
Dim
VOL
0
15-1919.fm Page 20 Monday, July 19, 1999 12:34 PM