Radio Shack 6 IN 1 RF REMOTE CONTROL SYSTEM Universal Remote User Manual


 
Need help? Call
1-800-950-7044!
50
TROUBLESHOOTING
If the system’s remote control stops working after you
successfully test the control of each device, or if you
are unable to get the remote control to work at all,
check the following:
Use manual controls or the original remote control
to confirm that your remote-controlled devices are
working properly.
Be sure you pressed the device key for the device
you want to control.
Replace the remote control’s batteries.
If you are using the system’s RF command con-
sole, make sure it is plugged in and installed in
the same room as the IR remote controlled
devices you want to operate. Be sure to point the
RF command console at the devices you want to
control.
If some buttons do not function for your device,
you might be able to search for a better device
code.
If you are still unable to determine the problem, call our
nationwide Universal Remote Control Hotline at 1-800-
950-7044.
15-1919.fm Page 50 Monday, July 19, 1999 12:34 PM