Filter
Top Products
12 USTIP USER GUIDE
You can install MPC as a standalone applet, described further in the Raritan Multi-Platform
Client and Raritan Remote Client User Guide.
Important: You must disable any pop-up blockers in order to launch MPC.
Launching RRC
Important: RRC works only with MS Internet Explorer. If you are using a different Web
browser, MPC will load automatically.
1. Log on to any Windows-based computer with network access to USTIP.
2. If you are using Windows NT, 2000, XP, or 2003, ensure that you are not a “restricted” user.
3. Launch Microsoft Internet Explorer (ensure that your Internet Explorer security settings allow
the download and execution of ActiveX controls).
Note: The IE default security setting of Medium is sufficient.
4. In the Internet Explorer Address bar, type the IP address assigned to the USTIP. Press
ENTER to load and launch the web access client, Raritan Remote Client (RRC).
Figure 8 RRC Connection Window
5. After RRC launches, a device tree of all automatically detected Raritan devices found on your
subnet is displayed on the left side of the screen. If you do not find your USTIP unit listed by
name, create an icon manually by selecting Connection Æ New Profile.
6. Double-click on the icon that corresponds to your USTIP unit.