Filter
Top Products
TV/VCR MAIN MENU
1 Screen
2 Time
TV/VCR MAIN MENU
1 Screen
2 Time
Sleep Timer
The sleep timer automatically turns the TV/VCR off after 30, 60, 90,
or 120 minutes.
1. Press MENU on the remote to display the TV/VCR MAIN MENU.
2. Press 2 to display the TIME menu.
3. Press 2 to display the SLEEP TIMER screen.
4. Press CHAN up or down to select 30, 60, 90, or 120 minutes.
5. Press MENU three times to exit.
While watching a program, press DISPLAY to check the amount
of time remaining before the TV turns off.
6. To cancel the sleep timer, first display the SLEEP TIMER menu
by repeating steps 1-4 above. Then, repeatedly press CHAN up
or down until 0:00 is displayed on the screen.
Wake-Up Timer
The timer turns the TV/VCR on at a desired time. You can set it to
wake you up in the morning or remind you that a favorite program
is about to start.
1. Press MENU on the remote to display the TV/VCR MAIN MENU.
2. Press 2 to display the TIME menu.
3. Press 3 to display the WAKE-UP TIMER menu.
4. Use the number buttons to enter the channel number and time.
• After you enter the time, press 1 for AM or 2 for P M . Example:
For a time of 5:07PM, press 5, then 0, then 7, then 2.
• Press CLEAR to correct an entry or RESET to clear the timer.
5. Press MENU to set the timer.
• The wake-up timer will turn on the TV/VCR every day. The
WAKE-UP indicator light on the front panel is illuminated
when the wake-up timer is set.
• Once the TV/VCR is turned on by the wake-up timer, the
unit automatically turns off after 60 minutes if no buttons
are pressed.
Note: When the wake-up timer turns on the TV/VCR, the volume
level does not change from when the TV/VCR was last turned off.
6. To cancel the wake-up timer, first display the WAKE-UP TIMER
menu by repeating steps 1-3 above. Then, press RESET to cancel
the timer, and press MENU to exit. The timer is also canceled if
MENU is pressed before step 4 is completed.
Front Panel Block
Selecting this option lets you block (disable) or unblock (enable) the
TV's front panel buttons. Any timer recordings will still record
(provided there is a tape in the VCR). Front Panel Block can keep
children from watching TV or playing with the TV buttons when a
parent is not present.
1. With the TV/VCR on, press and hold the POWER button on the
remote for approximately 6 seconds. The indicator in the Power
button flashes.
The indicator in the Power button flashes if the STOP/EJECT or
POWER buttons on the front panel are pushed but nothing will
happen.
To turn off the Front Panel Block, press and hold the POWER
button for 6 seconds.
TV/VCR Features
Using the TV/VCR Features
TIME
1 Set Time and Date
2 Sleep Timer
SLEEP TIMER
Turn off TV in 0:00
Press Channel up or
down to adjust timer.
Press MENU to exit
TIME
1 Set Time and Date
2 Sleep Timer
3 Wake-up Timer
WAKE-UP TIMER
Channel --
Time --:--
WAKE-UP TIMER
Channel 12
Time 05:07 AM
Press CLEAR to correct
Press RESET for --:--
Press MENU to exit
10
CH 08
Sleep Timer 0:30
10/31/98 Sat 0:800 AM SLP