Filter
Top Products
30
Hooking Up the TV/VCR
Connect a VCR or Camcorder for Copying Ta p e s
A. VCR for Copying Tapes
1. Connect as shown.
This connection requires additional accessories
not provided.
2. Plug in power cords of VCR and
TV/VCR.
3. Turn to page 27 for “Copying and
Editing Tapes.”
Press 00 on the remote to select the line
(audio/video) inputs on the TV/VCR to receive
the signal from the VCR.
If your VCR has stereo AUDIO OUT jacks,
connect the audio cable to the jack labeled
MONO. If neither jack is labeled MONO, you
may need a Y- adapter to hear both channels.
B. Camcorder for
Copying Tapes
1. Connect as shown.
This connection requires additional accessories
not provided.
2. Plug in TV/VCR’s power cord.
3. Turn to page 27 for “Copying and
Editing Tapes.”
Press 00 on the remote to select the line
(audio/video) inputs on the TV/VCR to receive
the signal from the camcorder.
If your camcorder has stereo AUDIO OUT jacks,
you may need a Y- adapter to hear both channels.
Caution: The unauthorized recording of
television programs and other materials
may infringe upon the rights of others.
A
B
Caution: The unauthorized recording of
television programs and other materials
may infringe upon the rights of others.