Filter
Top Products
18 Chapter 2
Using the Remote Control
Graphics contained within this publication are for representation only.
Chapter 2 19
Using the Remote Control
Graphics contained within this publication are for representation only.
Note:
The DVD, VCR, SAT/CAB, AUX/HD, and AUDIO
buttons also turn on most RCA, GE, and
Proscan products.
INFO Brings up the channel banner; press again to clear the screen.
INPUT Accesses the available video input channels (VID1, VID2, FRNT, CMP1,
CMP2 and DVI). Press the CH+ or CH- button to resume TV viewing.
LIGHT Press to illuminate some of the remote control’s buttons. To conserve
battery power, the light turns off after several seconds. Backlight won’t activate if
batteries are low, but blinks on and off quickly.
MENU Brings up the Main menu.
MUTE Reduces the TV’s volume to its minimum level. Press again to restore
the volume.
OK When in the menu system, selects highlighted items. When watching
TV, freezes the picture until you press any button on the remote to resume
normal TV viewing. Please note that when you "unfreeze" you go back to live
programming (skipping any programming that occurred during the freeze).
ON•OFF When in TV mode, turns the TV on and off. If in another component
mode (VCR, DVD, SAT/CAB, etc.) and programmed, will turn the component on
and off. When pressed twice within two seconds, the ON•OFF button turns off
most RCA, GE and Proscan components.
PIP Press once to bring up the small picture-in-picture (PIP) window. Press
again to bring up the picture-outside-picture (POP) windows. Press to remove
POP. (See Chapter 3 for more information about using PIP.)
PIP + or PIP – When using PIP or POP, changes the channel in the PIP
window.
PRESETS Displays the Picture and Sound preset settings. Use the up and down
arrow buttons to highlight either Picture or Sound settings. Use the left and right
arrow buttons to change to a different Picture or Sound preset.
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE If programmed,
provide transport control for some remote-controllable VCRs, DVD players, tape
decks, and CD players.
SAT/CAB Puts the remote in SAT/CAB mode and, if Autotuning is enabled, will
turn on the TV and tune to the correct input channel.
SKIP Press once before changing channels and the TV will wait 30 seconds
before returning you to the original channel. Press repeatedly to add more time.
SLEEP Brings up the Time menu with the Sleep timer item highlighted, if
you've set the time. If you haven't set the time, the Time menu item will be
highlighted, prompting you to enter the correct time.
SWAP When using PIP, swaps the main picture with the PIP window. When
using POP, swaps the left and right pictures.
TV Turns on the TV and puts the remote in TV mode. Also displays the channel
banner.
VCR Puts the remote in VCR mode and, if Autotuning is enabled, will turn on
the TV and tune to the correct input channel.
VOL – or VOL + Decreases or increases the TV’s volume.
ZOOM In PIP mode, changes the size of the PIP window.
Tip
The component button corresponding to
the mode you're in ickers when the remote
batteries are low and you press a button on
the remote.
A warning message may also appear on the
screen when you press a remote button and
the batteries are low.
Tip
To turn off most the RCA, GE, and Proscan
components that are connected to the TV,
press ON•OFF twice within two seconds.
This feature only works with most RCA, GE,
and Proscan products.