Filter
Top Products
5
LED indicator light This light turns red at each valid key press. When
programming the remote control, it flashes or turns on or off to indicate
programming status.
MENU
Displays the Main menu. If you are already in the menu system,
press OK or MENU to select a highlighted choice. When you are using
the remote control to operate an RCA, GE, or PROSCAN VCR (the
remote is in VCR mode), the MENU key functions as a PROGRAM key.
MUTE
Reduces the TV’s volume to its minimum level. Press again to
restore the volume.
OK
Selects a highlighted choice if you are in the menu system. After
entering a one-, two-, or three-digit satellite channel number, press to
tune to the channel. If you are entering a number other than a satellite
channel number (for instance, to tune your VCR to a channel), you do
not need to press this key. Press the OK key when the Interactive TV
icon (¿)
appears on the screen. Pressing OK will display more
information and offer the chance to interact in some way with
what is displayed on screen.
ON•OFF Turns the component you are controlling on or off. When
pressed twice within two seconds, all components that are on will be
turned off. This feature only works with most RCA, GE, and PROSCAN
products. You can also use the ON•OFF key on the top (front panel) of
the digital satellite receiver to turn off the receiver.
SKIP This key is not used by the digital satellite receiver. It is functional
only with RCA, GE, PROSCAN TVs and VCRs.
T
ransport Keys (REVERSE, PLAY, FORWARD, RECORD, STOP,
PAUSE) When programmed, these keys are used to control an auxiliary
component, such as a VCR or DVD player. Note: If your VCR is connected,
the RECORD key can be used to schedule a timed recording when using
the Program Guide or to begin recording while watching a program (in
VCR Mode).
V
OL + (UP)/ - (DOWN) Adjusts the audio volume of your TV.
WHO•INPUT
Press the WHO key one or more times to scroll through
the user profiles. When you are using the remote control to operate an
RCA, GE, or PROSCAN TV (in TV Mode), press the WHO•INPUT key
one or more times to scroll through the available video input sources.
Key Description (Continued)
Programming The Remote Control
The remote is already programmed to control most RCA, GE, and
PROSCAN branded components; it may need to be programmed to
control other manufacturers’ brands.
T
esting The Remote Control To determine whether the universal
remote control needs to be programmed, turn on a component, such as
a VCR, point the remote at the VCR, and press the VCR key. Then press
ON•OFF or CH + or CH - to see if the VCR responds to the remote
commands. If it does not respond, the remote needs to be programmed.
There are two ways to program the remote control: Automatic Code
Search or Direct Entry.