Filter
Top Products
35
More Features
One-Button Recording with Timer
Press the REC (record) button on the remote while you have a
program selected in the guide to set up a timer program. The
program information (channel, time, etc.) is stored in the first
available timer.
Using Fetch
Press the FETCH button on the remote to bring up your current
channel list. Then Point and Select a channel from the fetch list.
The Fetch menu gives you a logo-based channel list.
The Mailbox
The mailbox shows you messages that are sent—or “mailed”—
from your program providers. For example, you may receive a
message calling your attention to a new service.
How to tell when you have mail
There are two ways to tell if you have mail, depending on
whether the DSS
®
receiver is turned on or off.
• If the DSS
®
receiver is turned on, a mail icon appears in the
upper right corner of the channel marker.
• If the DSS
®
receiver is turned off, the power light on the
front panel of the receiver flashes.
Checking your mail
Select Mailbox on the Main menu to view your mail.
1. Point to a message and press MENU•SELECT. The message is
opened for you to read.
Is your ON/OFF Light Flashing?
Don’t worry, your receiver’s not
broken. It means that you have mail.