Filter
Top Products
62 Chapter 6
Additional Information
How to find your TV’s Video Input Channel
In order to see what’s playing on your DVD/VCR, you need to tune the TV to the Video Input
Channel that corresponds to the jacks you used to hook up the unit to the TV. The Video Input
Channel(s) varies for different brands and different models of TVs. Below are some things to try.
• Consult the Owner’s Manual that came with your TV.
• If you can’t find the information in the manual, or can’t find the manual, review the following list
of ways to access Video Input Channels on TVs.
• There might be a button on the TV’s remote control that accesses the Video Input Channel (see
table below for examples).
•You might select the Video Input Channel from the TV’s menu system.
•You might tune to it by pressing a specific channel number (see table below)
•Press the Channel up and/or down buttons on the TV’s remote control (sometimes the Video Input
Channel is stored in the channel list).
Video Input Channel Variations
Button/Switch Button on the Channel
on the TV TV remote Number
VIDEO VID1 S-VID 00 93
SIGNAL LINE INPUT 90 VID 1
VID 1 VID SOURCE 91 VID 2
VID 2 VIDEO AUX 92 INPUT
16166400.06 Additional 5/29/03, 10:02 PM62