Filter
Top Products
Connections & Setup
20 Chapter 1
Tip
Channel Search takes several minutes because
the TV is searching for all possible analog and
digital channels. You may want to leave and
come back later.
Tip
To access the setup menus manually, press
MENU and choose Assisted Setup.
Complete the Assisted Setup
The menu system in your TV allows the TV’s features to be configured to work
properly. On-screen information helps you make the right selections for your
setup. The first time you turn on your TV, the Assisted Setup screens appear
automatically.
Set the Menu Language
The first part of the Assisted Setup menu asks you to select your preferred
language for the menu system.
1. Highlight your preferred language for the menu system using the arrow
buttons.
2. Press OK to select that language.
Complete Channel Search
The next part of the Assisted Setup asks you if you want the TV to search for all
channels viewable through your antenna or cable TV system.
1. Highlight Full Search and press OK to tell the TV to begin searching for
channels. A progress report appears on the screen.
2. When search is complete, press OK (the first GUIDE Plus+ system setup
screen appears).
Notes: If you skip Channel Search now, you can access it later through
the Connections menu. See Chapter 4 for more details.
If cable box is connected to ANTENNA A, Channel Search cannot work.
The GUIDE Plus+ System Setup
Important Note: If you have a VCR and/or cable box connected to the
TV, you need to connect the G-LINK cable to use the GUIDE Plus+ system.
If you didn’t connect the G-LINK cable, go to page 17. Disregard the
screen that tells you to refer to the Quick Setup sheet because there is no
sheet packed with this TV.
The GUIDE Plus+ system is a no-fee, on-screen interactive program guide that
lists what shows are on TV in your area. In order to receive program listings,
you need to complete the following steps.
Step 1: Identifying Your TV’s Location
1. If your country is highlighted, press OK on the remote control.
If your country isn’t highlighted, press the up or down arrow button on the
remote control to highlight your country and press OK.
Tip
If you move to a new ZIP or postal code, or if
any of your information changes and you need
to access the setup screens from the TV’s main
menu— press MENU, choose GUIDE Plus+
Menu, and choose GUIDE Plus+ Setup, then
choose “No, repeat setup process.”