Filter
Top Products
58 Chapter 4
Using the TV’s Menu System
In the Audio Language menu, highlight the audio language you want by
pressing the up and down arrow buttons on your remote control. Press OK to
activate.
Some programs can have audio languages available that can be heard, but that
cannot be set as the default. To select and hear those audio languages, navigate
to the “Change Audio” action button and select OK.
SAP (Second Audio Program)
When turned on, Second Audio Program plays the program’s audio in a second
language, if one is available. SAP is also used to broadcast a program’s audio
with descriptions of the video for the visually impaired. Or, SAP might contain
audio which is totally unrelated to the video.
Note: SAP is broadcast in mono and is only available for analog programs,
not digital programs.
Balance
The Balance setting applies to the internal speakers, rear external speakers and
the headphone output. Balance does not affect the internal subwoofer nor any
other audio output. Balance is how much audio (loudness) gets sent to the left
and right speakers.
Fixed/Variable Out
The Fixed/Variable Out menu displays a choice list that lets you turn the TV’s
front internal and external speakers on or off and set the Fixed/Variable audio
output to a fixed- or variable-control level. The choices are:
• Variable Output, Speakers On This setting turns the TV’s front speakers
On and allows variable output from the TV’s Fixed/Variable Audio Output
jacks. Use this setting if the TV is not connected to an audio receiver or
amplifier and the volume is controlled by the TV.
• Variable Output, Speakers Off This setting turns the TV’s front speakers
Off and allows variable output from the TV’s Fixed/Variable Audio Output
jacks. Use this setting if the TV is connected to an audio receiver or
amplifier and the volume is controlled by the TV.
• Fixed Output, Speakers Off This setting turns the TV’s front speakers Off
and provides fixed output from the TV’s Fixed/Variable Audio Output jack
to a receiver or amplifier. With the Fixed Output, the TV’s volume control,
graphic equalizer, and mute are disabled. This output is ideal when
connecting to an audio receiver or amplifier that has its own remote control
for controlling the volume.
Note: If the Internal Speaker source switch on the back of the TV is set to
EXT AMP, it overrides any above setting of Speakers Off and allows the
internal speakers to be used as a center speaker input.