Filter
Top Products
37
Note: Video noise
reduction is available for
CMPT inputs only if the
signal is 480i.
Using the TV Menu Chapter 4
Screen Format – Change the screen format, choosing from Normal, Center, Zoom and Stretch. For
more information about screen formats, go to page 35.
Film Mode - (3:2 Pulldown) – This option automatically detects video sources that were originally
recorded on film (such as most movies) and converts them to a different format (for TV broadcast,
for example). Film Mode processes the converted signal so that it appears as close to the original as
possible. Another name for this process is 3:2 pulldown. When using Film Mode, keep these tips in
mind:
•TheOn setting (recommended) – When you check this setting, it enables the feature only when the
TV detects that move playback quality could be improved.
•TheOff setting (box unchecked) turns off the film mode conversion. Try using this setting if you think
the reverse 3:2 pulldown is causing distortions in your picture.
PC Settings – This option allows you to adjust the PC settings when in PC Mode.
Video Noise Reduction (not available on PC or digital channels) – This setting reduces picture “static”
or any type of interference. This feature is especially useful for providing a clearer picture in weak analog
signal conditions. Press the right arrow to choose between these options:
Low for a softer, smoother picture that retains picture sharpness and detail.
Normal for a slightly softer picture than the Low setting.
High for an even softer, smoother picture than the other settings (the picture detail is somewhat
decreased)
Sound Menu
The Sound Menu lets you adjust audio output. To access the Sound Menu, press MENU on the remote,
and then select Sound from the Main Menu. The following audio items can be adjusted:
Treble – Improves treble output.
Bass – Improves bass output.
Balance – Use the left or right arrows to adjust the amount of audio sent to the left and right speakers.
SRS – Option ON/OFF.
Analog TV Sound – Controls the manner in which the sound comes through your speakers. Options
available vary according to the input selected:
•Mono(availableforregularTVviewingonly)–Thisoptionplaysthesoundinmonoonly.Usethis
setting when receiving broadcasts with weak stereo signals.
•Stereo–Thisoptionsplitstheincomingstereoaudiosignalintoleftandrightchannels.MostTV
programs and recorded materials have stereo audio. The word “stereo” appears in the Channel
Banner when you time to a program that is broadcast in stereo.
•SecondAudioProgram(SAP)–Thisoptionplaystheprogram’saudioinasecondlanguage,
if available. The letters “SAP” appear in the Channel Banner when you tune to a program that
is broadcast with SAP information. SAP audio is broadcast in mono only. SAP is also used to
broadcast a program’s audio with descriptions of the video for the visually impaired.
Default Audio Language – Use this selection to choose the language you prefer for dialog on digital
channels. If your preferred language is being broadcast with a program, the TV plays it. If not, the TV
plays the default option for the program (usually English in the US). The default digital channel audio
language options are English, French, Spanish, German, Italian, Japanese, Chinese and Korean.
Current Audio Language (not available for analog channels) – Press the right arrow to choose from
the list of languages available for the program you’re watching. The language chosen becomes your
preferred language for all digital channels until you turn the TV off. If the language chosen is not being
broadcast with a program, the TV plays the default language for the program (usually English in the US).
Note: The menu grays out when the current channel selected is analog.