RCA L26HD31S Flat Panel Television User Manual


  Open as PDF
of 52
 
43
Other Information Chapter 5
You are having problems with the HDMI Connection.
•MakesuretheHDMIorDVIcomponentisturnedonandthecablesarermlyconnected.Ifproblems
still occur, turn off your component and reconnect it. Reset the power by unplugging the power cord
and plugging it back in.
•IfyouaretunedtotheHDMI1orHDMI2INPUTandyou’rereceivingUnusable Signal message
onscreen, press the INFO button on the remote. If Acquiring Channel appears in the Channel Banner,
the HDMI or DVI device isn’t responding. Contact the manufacturer of the HDMI or DVI device for further
assistance.
•IfyoutunetotheHDMI1orHDMI2INPUTandyouseesnow,thevideogoesinandout,orthevideo
takes a long time to appear, your HDMI or DVI component is having trouble sending video information to
the TV. Re-connect your device. Reset the power by unplugging the power cord and plugging it back
in. If problems persist, try connecting the Y Pb Pr jacks if they are available or contact the manufacturer
of the HDMI or DVI component for further assistance.
•Ifyouhaveblackbarsoneachsideofyourpicture,thecomponentyouconnectedmighthaveaswitch
or a menu option allowing you to change the picture quality output that will fix this. Choose either 720p
or 1080i.
•480isignalsaren’tsupportedbytheHDMI2/DVIorHDMI1INPUT
The remote control doesn’t work.
•SomethingmightbebetweentheremoteandtheremotelightsensoronthefrontoftheTV.Makesure
there is a clear path.
•TheremotemaynotbeaimeddirectlyattheTV.
•Thebatteriesintheremotemaybeweak,dead,orinstalledincorrectly.Putnewbatteriesintheremote.
(Note: If you remove the batteries, you may have to reprogram the remote to operate other component.)
You are experiencing problems with V-Chip/Parental Controls.
•Iftheratinglimitsdon’twork,youmustlockthesettings.GototheMainMenu(pressMENUonyour
remote), select Parental Control, select Lock Parental Control.
I don’t remember my password and I want to unlock the TV.
•Ifyouforgetyourpassword,turntheTVoff.SimultaneouslypressandholdVOLUPonthesidepanel
and CANCEL on the remote for 10 seconds. Next time you enter the Parental Control Menu, enter a
new password.
The V-Chip won’t let me watch a program even though it’s not rated as violent.
•MaybethemoviewasgivenanNR(NotRated)status.Afteryoublockmovieratings,youmustsetNR
to View Separately in order to view movies with an NR rating.
What Else Can I Do?
If you’ve been through the Troubleshooting section and nothing has fixed your problem, try rebooting
your TV. Note that after a reboot, you may need to run your TV through the setup process again. To do
a reboot, unplug the power cord from the wall outlet or power strip. Keep your TV unplugged for about
5 minutes. Then plug in the TV and turn it on. See if the problem is fixed. If the problem remains, then
please click on the Customer Support Menu at www.rca.com/television for updated FAQs or contact RCA
Customer Support at the support number provided in your Warranty under How To Get Service.
 previous next