Filter
Top Products
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a
cable TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have
not yet connected to an antenna or a cable system.
1
Unplug the cable or
antenna from the back
of the TV.
INSTALLATION
2
Connect the cable or
antenna to the
ANTENNA IN terminal
on the back of the VCR.
3
Connect a coaxial cable
between the ANTENNA
OUT terminal on the
VCR and the antenna
terminal on the TV.
4
Connect a set of audio
cables between the
AUDIO OUT jacks on the
VCR and the AUDIO
jacks on the TV.
5
Connect a video cable
between the VIDEO OUT
jack on the VCR and the
VIDEO jack on the TV.
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR
tape.
A coaxial cable is usually included with a VCR. (If not, check your local electronics
store).
2.4 CHAPTER TWO: INSTALLATION
1577575A.02 11/15/01 10:04 AM Page 4