Filter
Top Products
Connecting a Second VCR to Record from the TV
Your TV can send out signals of its picture and sound to be recorded by a second VCR.
To do this, connect your second VCR as follows:
1
Connect a set of audio
cables between the
AUDIO OUT jacks on the
TV and the AUDIO IN
jacks on the VCR.
2
Connect a video cable
between the VIDEO OUT
jack on the TV and the
VIDEO IN jack on the
VCR.
Refer to your VCR’s instructions for more information about how to record using this
kind of connection.
The VCR input jacks might be either on the front or on back of the VCR.
INSTALLATION
TV Side Panel
Y-Connector
Audio
Cable
Camcorder
Output Jacks
2
Connect an audio cable
between the AUDIO
OUTPUT jack on the
camcorder and the
AUDIO terminals on the
side of the TV.
3
Connect a video cable
between the VIDEO
OUTPUT jack on the
camcorder and the
VIDEO terminal on the
side of the TV.
1
Locate the A/V output
jacks on the camcorder.
They are usually found
on the side or back of
the camcorder.
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
The audio-video cables shown here are usually included with a Camcorder. (If not, check your
local electronics store.) If your camcorder is stereo, you need to connect a set of two cables.
TV Side Panel
Video Cable
Camcorder
Output Jacks
CHAPTER TWO: INSTALLATION 2.5
1577575A.02 11/15/01 10:04 AM Page 5