Filter
Top Products
9
Using Your TV and Remote
With VCRs: Setting the VCR 1 Channel
The VCR 1 Channel works with VCR1 button on the remote. If the VCR 1
Channel is set, pressing VCR1 selects the channel to see the VCR picture.
The VCR 1 Channel setting depends on which diagram you have used
from the Connection Guide. If you want to turn this feature off, set the
VCR 1 Channel to Disable. Refer to the chart below for your setting.
A. Press TV to set the remote to
control the TV.
B. Press MENU•PROG to select
the Setup menu. This menu
is white.
A. Press MOVE ̄ to highlight the
VCR 1 Channel.
B. Press MOVE ̈ to highlight the
channel.
A. Enter channel 00, 03, or 04.
Choose your setting from the
chart below. Press CHANNEL
down until “Disabled” is
displayed to turn the feature off.
1. Select the Setup Menu
2. Highlight VCR1 Channel
3. Enter channel number
13
Controls Alarm Adjust Setup
English Français Português
Autoprogram
Label: 13 Clear
Channel Memory: 13 Stored
Cable/Air: Cable
13
Controls Alarm Adjust Setup
English
Français Português
Autoprogram
Label: 13 Clear
Channel Memory: 13 Stored
Cable/Air: Cable
13
Controls Alarm Adjust Setup
English
Français Português
Autoprogram
Label: 13 Clear
Channel Memory: 13 Stored
Cable/Air: Cable
Diagram used from the
Connection Guide:
1B, 1C, 2B, 2C, 3B, 3C, 4C, 5C
4B, 5B
Set VCR 1 Channel to:
00
3 or 4 (same as 3/4 switch)
VCR 1 Channel: 03
VCR 1 Channel: 00