Filter
Top Products
VCR Features
36 Chapter 4
VCR Plus+ GOLD Programming System
The VCR Plus+ GOLD programming system makes timer recordings easier by automatically
setting and updating the clock and channel list for you. During the one-time QuickSet Guide
setup, the VCR prompts you to enter your zip code. Soon after, the VCR clock will set itself and
overnight, your VCR Plus+ programming system channel list should be input for you.
Time, date, and VCR Plus+ system information are downloaded from participating TV stations
over your antenna or cable system. The time and date are updated each time the VCR is turned
off (and after every power interruption). So, when your TV stations or cable company update
channel lineups, your VCR will get the most current channel list automatically, freeing you from
having to manually change the channel list.
If your VCR Plus+ GOLD system fails to download the proper information for any reason, you
can always manually map the channels. If you keep getting prompts about multiple cable
services in your area, you can turn off AUTO VCR Plus+ download by choosing 2 in the VCR
Plus+ SETUP menu.
To Turn Off the Automatic VCR Plus+ Download:
1. Press the MENU button on the remote control to display the VCR MAIN
MENU.
2. Press 4 to select CHANNELS.
3. Press 4 to select VCR Plus+ Setup.
4. Pressing 1 will take you to a screen to manually map VCR Plus+ system
channels. Pressing 2 will toggle between Auto VCR Plus+: ON and OFF.
Make sure this feature is turned off if you continually get fail to download
prompts and map the channels manually.
VCR PLUS+ SETUP
1 Set channel lists
2 Auto VCR Plus+: ON
VCR Plus+ data was not
found.
0 Exit
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Setup
5 Cable Box Setup
6 SAT Setup
0 Exit