Filter
Top Products
Using TV Menus 9
Using TV Menus
CHANNEL NAME < >
DELETE CH YES
TUNING
SOURCE AIR
CHANNEL 8
FINE TUNE
AUTO SEARCH
The TUNING Menu
The TUNING menu is used to adjust the signal source, channel
setup, and reception of the TV.
SOURCE Selects AIR or CABLE. Select AIR to receive
a broadcast signal. Select CABLE to receive
a CATV signal.
CHANNEL Use the VOL
/ buttons on the remote
(or the VOL /
buttons on the front of
the TV) to scroll through the channels
available. You can enter the channel
number directly using the number buttons.
CHANNEL NAME Assign a label to channels 2 through 11
for off AIR only. Use the VOL
/
buttons on the remote or front of the TV
to select (scroll) a character for the
fi ve-character label for channels 2-11. Use
the VOL / to go to the next digit.
DELETE CH Select YES to remove the channel.
Select NO to enter to the channel.
FINE TUNE Fine tunes a channel for best reception.
Use the VOL
/ buttons on the remote
to adjust for fi ne tuning.
AUTO SEARCH Starts channel search and stores the
channels automatically. Use the VOL
/
buttons on the remote to begin the auto
search. If you wish to stop the search
before completed, press MENU.
PASSWORD
PASSWORD
The PASSWORD Menu
You need a password to enter the PARENTAL GUIDE menu. The
initial password is “1234.” The fi rst time you use this menu
you should change the password. If you happen to forget the
password, enter the default password “5898” to create a new
password. After you enter a correct password, the PARENTAL
GUIDE menu is displayed.
20F510TDr.indd 920F510TDr.indd 9 7/28/05 2:06:53 PM7/28/05 2:06:53 PM