Filter
Top Products
26
Technical Specifications:
Amplifier Section:
RMS Output Power: Dolby Digital Mode with
10% Total Harmonic Distortion
Rear Channels: 40 Watts each Channel (1KHz,
4Ohm)
Front and Center Channel: 40 Watts each Channel
(1KHz, 4Ohm)
Subwoofer Channel: 50 Watts (100Hz, 3Ohm)
Total RMS Output Power, Dolby Digital mode :
250 W
FTC Output Power: Dolby Digital Mode with 10%
Total Harmonic Distortion
Front Channels (L and R ): 20 Watts per Channel
(1KHz, 4Ohm)
Rear Channels (L and R): 20 Watts per Channel
(1KHz, 4Ohm)
Center Channel: 30 Watts (1KHz, 4Ohm)
Subwoofer Channel: 35 Watts (100Hz, 3Ohm)
Total FTC Output Power, Dolby Digital mode:
145 Watts
Muting Attenuation: 70 dB
Frequency Response: 200Hz - 20KHz/3dB, 1KHz
ref.
Subwoofer Frequency Response: 20Hz-200Hz/
-3dB, 100Hz ref.
Signal to Noise Ratio: 70 dB (Dolby digital mode)
AM Tuner Section:
Frequency Response: 2kHz +/-3dB, 400Hz ref.
Usable Sensitivity: 3000uV/m @ S/N 20dB
Signal to Noise: 38dB
IF Rejection: 35dB
FM Tuner Section:
Frequency Response: 15kHz +/-3dB, 1kHz ref.
Quieting: 24dB
Signal to Noise: 62dB(stereo) / 65dB(mono)
IF Rejection: 70dB
Dimensions (H x W x D mm) :
Unit - 66 x 360 x 334
Front Speakers and Stands - 163 x 81 x 90
Front Speakers without Stands - 109 x 81 x 90
Center Speaker - 82 x 185 x 92
Rear Speakers - 110 x 81 x 90
Subwoofer - 310 x 155 x 291
Additional Information
EN
RTD217 EN 3/1/07 5:21 PM Page 32