EN
1
Things to consider before you
connect
• Ensure that the mains supply in your house
complies with that indicated on the
identification sticker located on the back of
your unit.
• Install your unit horizontally, away from any
source of heat (fireplace) or appliances
creating strong magnetic or electric fields. The
components of this unit are sensitive to heat.
The maximum ambient temperature should
not exceed 35°C/95°F.
• Leave enough space around the unit to allow
adequate ventilation: 10 cm/4 inches on either
side and above the top, and 5 cm/2 inches at
the rear.
• The humidity of the room should not exceed
75%. If you have to use the unit outdoors, do
not expose it to rain or splashing water. The
apparatus should not be exposed to dripping
or splashing and no objects filled with liquids,
such as vases, should be placed on the
apparatus.
• Moving the unit from a cold place to a warm
one can cause condensation on some
components inside the unit. Let the
condensation disappear on its own before
turning the unit on again.
• Before moving the unit, make sure the disc
tray is empty.
• Where the mains plug or an appliance coupler
is used as a disconnect device, the disconnect
device shall remain readily operable.
• Other important use and cleaning information
at the end of the booklet.
Connections and Setup
Remote control and 2
non-rechargeable AAA
batteries
Left and right
Surround
Speakers
Composite
Video Cable
One Pig-Tail
antenna wire