Filter
Top Products
18
Playing a Tape
Operating Instructions
NTSC Video Playback Mode
You can select the type of playback for tapes recorded in NTSC.
1. Press MENU•PROG on the remote to see the VCR MAIN MENU
on the TV screen.
2. Press 4 to display the PREFERENCES menu.
3. Press 5 to select NTSC or PAL playback.
¥ Select Play NTSC as: PAL to have the tape play back in
PAL.
¥ Select Play NTSC as: NTSC to have the tape play back in
NTSC.
Play a Tape
1. Turn on the TV and tune it to channel 3, 4, or TVÕs video input
to see the picture from the VCR.
2. Insert a tape in the VCR.
VCR automatically turns on. The cassette-in indicator
lights and the VCR indicator lights. The tape automatically
begins playback if the safety tab on the cassette has been
removed.
3. Press PLAY, if necessary. PLAY appears in the VCRÕs display
panel.
4. Press TRACKING up or down to remove any streaks from the
picture, if necessary. Details are on page 20.
5. Press STOP.
6. Press REW.
The VCR will automatically rewind the tape if it reaches the
end of the tape during playback. While rewinding, you can
press POWER and the VCR will turn off after rewinding.
7. Press EJECT on the VCR to eject the tape once it is completely
rewound.
Safety Tab
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
4 Preferences
PREFERENCES
1 Remote Control: VCR1
2 Front Panel: AUTO
3 Output Channel: 3
4 Video System: AUTO
5 Play NTSC as: NTSC
0 Exit