Filter
Top Products
6
Hooking Up the VCR
Connecting Two VCRs for Copying Tapes
VIDEO
IN
OUT
ANTENNA
AUDIO
IN
OUT
RIGHT
RIGHT
L/MONO
L/MONO
VIDEO
IN
OUT
ANTENNA
AUDIO
IN
OUT
RIGHT
RIGHT
L/MONO
L/MONO
Playback VCR
From Antenna, Cable
or Cable Box
RF Coaxial Cable
(supplied)
Recording VCR
Audio/Video
Cables
RF Coaxial
Cable
or
Use the previously selected
hookup to the TV.
VIDEO
IN
OUT
ANTENNA
AUDIO
IN
OUT
RIGHT
RIGHT
L/MONO
L/MONO
VIDEO
IN
OUT
ANTENNA
AUDIO
IN
OUT
RIGHT
RIGHT
L/MONO
L/MONO
Playback VCR (only)
Recording VCR
Audio/Video
Cables
RF Coaxial Cable
(supplied)
or
Use the previously selected
hookup to the TV.
From Antenna, Cable
or Cable Box
Audio/Video
Cables
Option A hookup.
Use this hookup for a simple connection which
requires fewer accessories.
1. Select a hookup from pages 2 through 5 and
then modify with this connection.
2. Set the VCR output channel to either channel 3
or 4.
See page 8 for details.
You will tune the recording VCR to this channel to
receive the signal from the playback VCR.
3. Connect as shown.
This connection may require additional accessories
not provided.
4. Plug in power cords of VCRs and TV.
5.
Option B hookup.
Use this hookup for slightly improved copy
quality and hi-fi stereo recording.
1. Select a hookup from pages 2 through 5 and
then modify with this connection.
2. Connect as shown.
This connection requires additional accessories not
provided.
If your TV is not stereo, connect its audio jack to the
VCRÕs AUDIO L/MONO jack to hear sound from both
channels. If the VCR does not have a MONO jack, you
may need a Y-adapter.
3. Plug in power cords of VCRs and TV.
4.
Select the line (audio/video) input on the
recording VCR to receive the signal from the
playback VCR.
Continue to page 7.
Continue to page 7.
B
A
Caution: The unauthorized recording of
television programs or other materials
may infringe the rights of others.