Filter
Top Products
28
Recording a Program
Select Cable Box (or Satellite Receiver) Channel
If you receive all channels from a cable box (or satellite receiver) and complete Cable Box
Setup, the VCR will automatically enter the output channel of your cable box (or satellite
receiver) as the channel to be recorded in the TIMER RECORDINGS menu.
1. Press MENU•PROG to display the VCR MAIN MENU on the
TV screen.
2. Press 3 to select CHANNELS menu.
3. Press 4 to select Cable Box Setup menu.
4. Cable box not used for all channels: Press 2. You are
finished with cable box setup.
Cable box (or satellite receiver) used for all channels: Press
1 to continue .
5. Press two numbers on the remote to enter the output channel
of your cable box (or satellite receiver). Press 0 before a
single-digit number. Valid numbers are 01 - 99.
If you connected your cable box (or satellite receiver) to the
VCR using itÕs AUDIO/VIDEO OUT jacks, press INPUT on the
remote to select the VIDEO IN option.
Press CLEAR on the remote to correct an entry.
6. Press MENU•PROG to proceed.
A message appears showing the output channel of your cable
box (or satellite receiver) that the VCR will automatically
enter as the channel to be recorded in the TIMER
RECORDINGS menu.
7. Press MENU•PROG to proceed.
Check or Clear a Timer Recording
1. Press MENU•PROG on remote to display the VCR MAIN
MENU on the TV screen.
2. Press 1 to display the TIMER RECORDINGS menu.
3. Press 2 for Review Existing Progs. feature.
The first program in the timer is displayed.
¥ Check the Programs: Press MENU•PROG to display
information for the next program.
¥ Clear the Program: Press CLEAR when the program
appears that you want to delete.
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the AUDIO
and VIDEO IN jacks of the VCR. Recording from the line
input is convenient if you have a satellite receiver or similar
component attached to these jacks. To timer record from the
component connected to the VCRÕs line input:
Press INPUT to enter the channel number when you program
the timer. Enter VIDEO1 to record from the jacks on back of
the VCR or VIDEO2 to record from the jacks on the front of
VCR MAIN MENU
1 Timer Recordings
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 Cable Box Setup
CABLE BOX SETUP
Is a cable box being
used with the VCR for
all channels?
1 Yes
2 No
CABLE BOX SETUP
Enter the output
channel of the cable
box.
--
CABLE BOX SETUP
The VCR will now receive
all channels from the
cable box on VCR Ch 03.
Press MENU to exit
Program 1 (One Time)
Channel VIDEO1
Start Time --:--
End Time --:--
Start Date --/--/--
Tape Speed SLP
Press CLEAR to correct
Press MENU to exit
TIMER RECORDINGS
1 Create a New Program
2 Review Existing Progs.
Program 1 (One Time)
Channel 08
Start Time 02:10 PM
End Time 03:35 PM
Start Date 11/18/95 Sat
Tape Speed SLP
Press CLEAR to delete
Press MENU for next prog
Recording While You’re Away (Timer Recording)