Filter
Top Products
17
Using the Playback Features
Zero Search
The zero search feature lets you quickly return to a counter reading of
0:00:00 at any spot on the tape. This is especially convenient when you
want to watch a segment of the tape several times.
1. Insert the prerecorded tape.
2. Press DISPLAY twice to display only the time counter on the
TV screen.
3. Use PLAY, FF, or REW to advance to the place on the tape
where you want to return quickly.
4. Press CLEAR to reset the time counter to 0:00:00.
5. Continue playing the tape.
6. Press STOP.
7. Press SEARCH to display the ZERO SEARCH menu on the
TV screen. The current time counter appears.
8. Press REW or FF to return to 0:00:00. The time counter
remains in the upper right corner of the TV screen during
search.
Commercial Scan (SEARCH Button)
This is useful for scanning commercials or short program segments.
1. Press SEARCH during playback to advance the tape
approximately 60 seconds.
Slow Motion
You can view the picture in slow motion during play or play pause.
Sound is turned off during slow-motion playback. Slow motion works
best in the SP or SLP speed.
1. Press SLOW to begin slow-motion playback.
2. Use TRACKING up or down on the remote or the VCR to
remove any streaks from the picture.
3. Press SLOW or PLAY to return to playback.
The VCR automatically switches from slow-motion playback
to stop after a few minutes.
Playing a Tape
CLEAR
MENU
SPEED
INPUT
F. ADV
TRACKING
STOP
PLAY
1 2 3
54
6
7
9
8
0
PAUSE
SLOW
SEARCH
REC
FF
REW
CHAN
POWER
DISPLAY
TV•VCR
PREV CH
ZERO SEARCH
CURRENT TAPE COUNTER IS
2:17:25
PRESS REW TO GO TO 0:00
PRESS SEARCH TO EXIT
ZERO SEARCH
CURRENT TAPE COUNTER IS
-2:17:25
PRESS FWD TO GO TO 0:00
PRESS SEARCH TO EXIT