Filter
Top Products
25
Recording a Program
Checking or Clearing Timer Recordings
1. Press MENU on remote to display the VCR MAIN
MENU.
2. Press 2 for REVIEW PROGRAMS.
Each entered program is displayed for a few seconds in
sequence. Press MENU or 2 to display information
faster.
3. Press CLEAR on the remote when the program you
want to erase appears on the screen.
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the AUDIO
and VIDEO IN jacks of the VCR. Recording from the line
input is convenient if you have a satellite receiver or
similar component attached to these jacks.
To timer record from the component connected to the
VCR’s line input, press INPUT on the remote to enter
VIDEO IN instead of the channel number on the TV screen
during timer programming.
Recording While You’re Away (Timer Recording)
VCR MAIN MENU
1 TIMER PROGRAMMING
2 REVIEW PROGRAMS
3 CHANNEL SETUP
PROGRAM 1 - ONE TIME
CHANNEL 08 CABLE
START TIME 02:10 PM
END TIME 03:35 PM
START DATE 11/17/95 FRI
TAPE SPEED SLP
PRESS CLEAR TO DELETE
PRESS MENU FOR NEXT PROG
PROGRAM 1 - ONE TIME
CHANNEL VIDEO IN
START TIME --:--
END TIME --:--
START DATE --/--/--
TAPE SPEED SLP
PRESS CLEAR TO CORRECT
PRESS MENU TO EXIT
1. Press MENU on the remote to display the VCR
MAIN MENU.
2. Press 3 to display the CHANNEL SETUP menu.
3. Press 4 to display the CABLE BOX SETUP menu.
4. Press 1 when the CABLE BOX SETUP menu
appears.
5. Press two numbers on the remote to enter the
output channel of your cable box. Press 0 before a
single-digit number. (Valid numbers are 01 – 13.)
Press CLEAR on the remote to correct an entry.
If you connected your cable box to the VCR using
the cable box’s AUDIO/VIDEO OUT jacks, press
INPUT on the remote to select the VIDEO IN option.
6. Press MENU. A message appears which will time
out, or you can press MENU to return to CHANNEL
SETUP Menu.
The VCR automatically enters the output channel of
your cable box and CABLE in the TIMER
PROGRAMMING menu.
Select cable box viewing channel. (Required only if all channels
are received from a cable box.)
VCR MAIN MENU
1 TIMER PROGRAMMING
2 REVIEW PROGRAMS
3 CHANNEL SETUP
CHANNEL SETUP
1 AUTO-SEARCH CHANNELS
2 ADD/REMOVE CHANNELS
3 TUNING MODE: CABLE
4 CABLE BOX SETUP
IS A CABLE BOX BEING
USED WITH THE VCR FOR
ALL CHANNELS?
1 YES, CONTINUE
ENTER THE CHANNEL
NUMBER FOR VIEWING
THE CABLE BOX SIGNAL
--
YOUR VCR WILL NOW
RECEIVE ALL CHANNELS
FROM THE CABLE BOX
ON VCR CH 11
PRESS MENU TO EXIT