RCA VR702HF VCR User Manual


 
10
Setting Up the VCR
CABLE BOX SETUP
On what channel does
the VCR receive signals
from the cable box?
(usually 3, 4, or Video)
04
Press CLEAR to correct
Press MENU to continue
CABLE BOX SETUP
The VCR will now
receive all signals
from the cable box
on channel 04.
Press MENU to continue
Once you complete the setup, the VCR confirms that it
will receive all signals on the designated channel.
VCR Channels List
If you use a cable box for all channels, this step is not
necessary. Your VCR may come with a channel list preset at
the factory, but you may want to add or delete some
channels depending on whether they are active.
To Auto Channel Search
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Setup
5 Cable Box Setup
0 Exit
3. Press 1 to display the AUTO CHANNEL SEARCH menu.
AUTO CHANNEL SEARCH
What type of signal
are you using?
1 Cable TV
2 Antenna
3 Detect Automatically
0 Cancel
4. Select one of the three AUTO CHANNEL SEARCH
options:
Cable TV searches for cable channels
Antenna searches for local broadcast stations
Detect Automatically will make this decision for you
The VCR begins scanning for the available channelsthis