RCA VR702HF VCR User Manual


 
71
Appendix: reference
VCR makes noise when stopped
VCR is removing tape from heads. This is normal. The head cylinder
inside the VCR will continue to rotate for a few minutes after you put
the VCR in the stop mode.
Will not Auto Channel Search active channels
correctly
Check to make sure the antenna connections are secure and correct.
Check to make sure the Signal Type: CABLE/ANTENNA feature is set
correctly.
If Detect Automatically was selected for the Signal Type in the AUTO
CHANNEL SEARCH menu, try using either CABLE TV or ANTENNA
instead.
May not be necessary if using a cable box for all channels. Contact your
local cable company for more information.
Tape plays back in slow motion
Press PLAY to return to normal playback.
Cannot select channels over 69
Cable channels over 69 can only be selected if Signal Type: CABLE/
ANTENNA feature is set to CABLE.
Cassette with safety tab removed does not start to
play automatically
Check to make sure the AUTO PLAY ON/OFF feature is set to ON.
Timer ( ) indicator flashes
The clock is not set.
Check to make sure there is a cassette in the VCR when a timer
recording is set.
Time counter disappears during searching
This is normal.
On-screen menus appear in English, French, or
Spanish
Check LANGUAGE feature.
No stereo sound during playback
Check to make sure the TAPE PLAYBACK feature is set to Hi-Fi to
hear stereo sound during playback. The tape you are playing must be
recorded in Hi-Fi in order to use the HI-FI feature.
Must use the AUDIO/VIDEO jacks on the VCR to hear stereo sound.
Stereo audio too noisy
Stereo signal is weak. Set reception: STEREO/SAP/MONO feature
to MONO.
Press one of the TRACKING up or down buttons to minimize the noise.