Roland TU-500 Universal Remote User Manual


 
8
Power Cord Connection and Large Retainer Installation
Arm Installation
The configuration of the AC adapter varies
according to regional differences in
voltage. Please note that the descriptions in
this manual are for the 117 V adapter.
Attach the retainer (large) to the back of the stand, and arrange the cord
connected to the main unit so that it is secured in place as shown in the figure.
Rear
Front
Arrange the cord so that the end
that plugs into the main unit is
extended to the front from under
the stay on the stand.
Rail slider
Arm
Loosen the mounting screws.
Installing the Mirror
Align with the tip of
the stand's metal
portion.
Required tool
Small
(2)
Stopper
(1)
Mirror
(3)
Secure in place with
the bolt.
Stay