Filter
Top Products
21
English
• Files which do not belong to any folder are
grouped into “group 1.”
• The RDV-1040 recognizes up to 150 files
per group, and up to 99 groups per disc. If
there are files other than JPEG files, they also
count against the 150-file total.
Notes for Making JPEG Disc
using a CD-R/CD-RW disc
• Select “ISO 9660” as the disc format.
• Record your material at a 640 x 480 pixel
resolution.
• The RDV-1040 supports the baseline JPEG
format.
Basic JPEG Operations
To See a Specific Picture
When inserting a JPEG disc, after the disc con-
tents are read, the JPEG CONTROL display
automatically appears on the TV screen. You
can select a file for viewing with this display.
1 Make sure that the black (cursor) bar is in
the left (group) column. If it is in the right
column, press
(PLAY)
28
to move it to
the left column.
2 Press / to move the bar to a desired
group. On the right column, files in the se-
lected group are shown.
3 Press
/ to select a desired file, then
press ENTER
34
. The selected file (still pic-
ture) is shown on the TV. If the selected file
is unplayable, a black screen appears.
NOTE: You can also select a desired file by
pressing
(PLAY)
28
to move the black
bar to the right (file) column then using
/
.
To display another picture press / or
/ to select it.
To dismiss the picture press ■ (STOP)
9
or
MENU
30
. The TV screen returns to the JPEG
CONTROL display.
NOTES: The RDV-1040 supports the
baseline JPEG format.
The RDV-1040 does not support “packet
writing (UDF format)” discs.
The RDV-1040 supports discs recorded
with multiple sessions.
The RDV-1040 may not be able to read
some discs, or may take a long time to dis-
play a picture on the disc, due to disc char-
acteristics, recording conditions, or numbers
of groups (folders), etc.
Programmed and random playback func-
tions do not work with JPEG discs.
The screen saver function will be activated
if the same picture is displayed for more
than 5 minutes except during slide show
playback.
The RDV-1040 only can play back files
with the following file extensions; “.jpg,”
“.jpeg,” “.JPG,” “.JPEG” and any other
combination of upper case and lower case
letters (such as “.Jpg”).
If a JPEG file name includes any 2-byte
character, the RDV-1040 may not show the
file name correctly.
If a picture has been saved at greater than
640 x 480 pixel resolution, it may take
some time to display the picture.
The RDV-1040 does not support pictures of
more than 2400 pixels in horizontal resolu-
tion. Make sure that the horizontal resolution
of the picture is 2400 pixels or less.
To Zoom In on a Picture
1 While in pause mode, press ZOOM
24
.
Each time you press ZOOM, the magnifi-
cation is doubled (1.8, 4, 8, 16, 32 and 64
times).
2 Press /// to move the zoomed po-
sition.
Viewing Pictures Continuously
(Slide Show Mode)
You can see files (still pictures) one after an-
other automatically. To start the slide show
(PLAY)
28
. The slide show starts from the
beginning of the disc. Each file (still picture)
is displayed for approximately 3 seconds.
To stop slide show playback in the middle press
■ (STOP)
9
or MENU
30
. The TV screen
returns to the JPEG CONTROL display.
Pressing
(PLAY)
28
resumes slide show
playback from the last picture displayed.
To keep showing the current picture press
II
(PAUSE)
27
or ENTER
34
.
Pressing
(PLAY)
28
resumes the slide show
playback.
To Select the Start Point of the
Slide Show
From the JPEG CONTROL display –
1 Make sure that the black (cursor) bar is in
the left (group) column. If it is in the right col-
umn, press to move it to the left column.
2 Press / to move the bar to a desired
group.
3 Press
/ to select a file.
4 Press
(PLAY)
28
.
The slide show starts from the specified file.
Direct selection –
1 During playback or while stopped, press
TITLE/GROUP
7
.
2 Press the numeric buttons
4
to specify a
group number.
Examples:
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
3 Press the numeric buttons to specify a file
number. The RDV-1040 starts slide show
playback from the specified file. If you do
not specify a file, the RDV-1040 starts slide
show playback from the first file in the group.