Rotel RDV-1045 DVD Player User Manual


 
6
RDV-1045 DVD Player
About the RDV-1045
Thank you for purchasing the Rotel RDV-1045.
It will provide years of enjoyment when used in
a high-quality audio/video system.
The RDV-1045 is one of the most flexible compo
-
nents you can add to your audio/video system.
In addition to DVD Video discs, the RDV-1045
can play Video and audio CD discs recorded in
a variey of formats. It provides a full range of
operating features and control functions.
Angle function*
You can select a desired angle from multiple
camera angles recorded on the DVD disc.
Zoom function
You can view scenes close-up.
Video Fine Processor (VFP) controls
You can adjust many video image characteristics
to suit the type of program being played or
personal preferences.
High quality digital sound
You can enjoy high quality sound from disc
recorded with a full range of digital audio
formats.
Surround function*
The unit is compatible with Dolby Digital sur
-
round and DTS surround.
3D Phonic (VSS) function
You can enjoy surround sound with your 2-
channel system.
Multi-language subtitles and sound*
You can select a subtitle or sound language
from those recorded on the DVD disc.
Multi-disc playback
The RDV-1045 can play Audio CDs and Video
CDs as well DVD Video discs.
On-screen display
User-friendly on-screen displays allow you to
operate the unit easily.
* Functions only with DVD discs.
Precautions
Please read this manual carefully, particularly
the Caution information on page 2. In addition
to basic installation and operating instructions
this manual provides valuable information on
various system configurations as well as general
information that will help you get the most from
your system. Please contact your authorized
Rotel dealer for answers to any questions you
might have. In addition, all of us at Rotel wel
-
come your questions and comments.
Save the RDV-1045 shipping carton and all
enclosed packing material for future use. Ship
-
ping or moving the RDV-1045 in anything other
than the original packing material may result
in severe damage.
Be sure to keep the original sales receipt. It is
your best record of the date of purchase, which
you will need in the event warranty service is
ever required.
Register your product online at:
www.rotel.com/register
Also keep your original sales receipt. It is your
proof of purchase in the event that warranty
service is required.
Placement
Place the RDV-1045 on a surface that is level,
dry and neither too hot nor too cold (between
41˚F and 95˚F, 5˚C and 35˚C). Do not place the
unit where it will be exposed to direct sunlight.
Avoid locations that are dusty. Do not place
the unit too close to the television set. Do not
place the RDV-1045 where it will be exposed
to vibrations, such as near a subwoofer. To
ensure proper ventilation observe the minimum
clearance specifications listed in the safety
information on page 2.
Audio/Video Connections
NOTE: Do not plug in the power cable until
all audio/video signal connections are com-
plete. Do not change any audio/video cable
connections until the RDV-1045 has been
unplugged from the power outlet.
Carefully read the instructions supplied with
the components you are going to connect to
the RDV-1045 to be sure they are compatible.
If you have questions, contact your authorized
Rotel dealer.
NOTE: Connect VIDEO OUT
qwe
of
the unit directly to the video input of your TV.
Connecting VIDEO OUT to a TV via a VCR
may result in unacceptable video quality be-
cause many discs are copy-protected.
Figure 4: Rear Panel Connections
0
AC power cord receptacle
For the power cord connected to the wall
outlet.
-
OPTICAL DIGITAL OUTPUT
Provides a digital output signal to receivers or
sound processors that can decode it.
=
Audio ANALOG OUTPUT jacks
Left and right channel analog audio outputs.
q
COMPONENT VIDEO OUTPUT jacks
Outputs component video signals.
w
S VIDEO OUTPUT jack
Outputs an S-video signal.
e
COMPOSITE VIDEO OUTPUT jack
Outputs a composite video signal.
r
External Remote Input
(“Ext Rem In”)
This feature is useful when the unit is installed
in a cabinet and the front panel IR sensor is
blocked.