Filter
Top Products
12
Connecting an Antenna
or Cable
Connecting to the Video
or S-Video Input (INPUT1
or INPUT2)
To view television channels, a signal must be
input from either an outdoor antenna or a cable
television system.
1. Connect the antenna or input cable to the 75
Ω coaxial input on the rear of the display.
2. If you are using an indoor antenna, you may
need to turn it when tuning your television until
you receive a clear picture.
ANT
or
Cable Television
Network
Rear of the TV
(A) For Video Input
1. Connect the RCA cable to the input jacks (video+ audio L/R of Input1 or Input2) on
the display and output jacks on the external equipment such as a VCR, camcorder
and some video game devices.
(B) For S-Video Input
1. Connect the S-Video/RCA (audio L/R of Input1 or Input2) cable to the input jacks on
the display and output jacks on the external equipment such as a VCR, camcorder
and some video game devices.
2. If the external equipment has mono audio output, connect it only to left jack of the
Audio Input/Output.
INPUT1
Rear of the display
Input2
S-Video
Video
R
Audio
L
Right side of the display
(A) For Video (RCA) Input
(B) For S-Video Input
Connections