Filter
Top Products
18
Selecting Picture Adjust
Basic Operations
1. Press the MENU button on the remote control.
2. Press the ▲▼ button to select PICTURE ADJUST and then press the ENTER
or ► button.
3. Press the ▲▼ button to select Brightness, Contrast, Color, Tint, Sharpness,
Color Temp., Backlight, Save Settings or Restore Settings.
4. Press the MENU button to return to the previous menu.
Note:
Each input and scan rate has their
own picture memories. Make sure
you store your picture settings before
you switch to another input or scan
rate.
Runco CR-26HD
Source
Aspect Ratio
Picture Adjust
Audio
Channel
Ti
mer
Setup
ISF Calibration
Picture Adjust
Brightness
Contrast
Color
Tint
Sharpnes
s
Color Temp.
Backligh
t
Save Settings
Restore Settings
Note:
Temperature 5400, 6500, 8500
are global selections and are not
adjustable. If Color Temp. requires
calibration, you must select
Custom and make adjustments
in the ISF Menu under White
Balance. (See page 24)
Save Settings
Custom
Picture Adjust
Brightness
Contrast
Colo
r
Tint
Sharpness
Color Temp.
Backlight
Save Settings
Restore Settings
Backlight 100
Brightness 50
Contrast 50
Color 50
Tint 50
Sharpness 50
Picture Adjust
Brightness
Contrast
Color
Tint
Sharpness
Color Temp.
Backlight
Save Settings
Restore Settings
Color Temp.
5400
6500
8500
> Custom
Picture Adjust
Brightness
Contrast
Colo
r
Tint
Sharpness
Color Temp.
Backlight
Save Settings
Restore Settings
Restore Settings
Custom
ISF Night
ISF Day
Picture Adjust
Brightness
Contrast
Colo
r
Tint
Sharpness
Color Temp.
Backlight
Save Settings
Restore Settings