Runco DTV-940 CRT Television User Manual


 
7-6
Deletion of blocks
This item is password protected.
The delete function is used to clear all data (settings) from an adjustment block.
A delete can be given :
- block by block
or
- for all blocks.
Deleting block by block
The ‘delete a block’ function deletes the settings of a selected block.
Highlight ‘Delete a block’ with the control disc and press ENTER.
Push the control disc up or down to select the desired adjustment block. Press
ENTER to delete the selected adjustment block. Aconfirmation menu will be dis-
played.
ENTER will delete the selected block.
EXIT cancels the deletion procedure and returns to the Service mode main menu.
Deletion of all blocks
Highlight ‘delete all blocks’ with the control disc and press ENTER.
If you are certain you wish to delete all blocks, press ENTER to confirm, other-
wise press EXIT to return.
Once ENTER is pressed, all block headers and adjustment settings are perma-
nently removed and cannot be restored.