Filter
Top Products
APX-3
ON - SCREEN OPERATING INSTRUCTIONS
ACCESS TO EYE-Q
TM
ON-SCREEN MENUS
After the EYE-Q
TM
unit has been correctly installed in the projec-
tor, press the <ADJUST> button on the RCU (Remote Control
Unit) or the local keypad of the projector to enter the ‘Adjustment
mode’
(please refer to the projector Owner’s Manual). The EYE-Q
TM
path will be displayed in the menu:
Highlight EYE-Q
TM
by pushing the or keys of the
control disc (on RCU).
Press the <ENTER> button to enter the EYE-Q
TM
menu.
EYE-Q
TM
MENU
The EYE-Q
TM
menu will be displayed after the path EYE-Q
TM
is
selected. Six items are available:
TOUCHUP.
AUTOCONVERGENCE.
QUICKAUTOPICTURE.
FULLAUTOPICTURE.
EYE-Q
TM
SETUP.
EYE-Q
TM
DIAGNOSTICS.
Choose EYE-Q
TM
SETUP first to carry out the SETUP procedures.
Use EYE-Q
TM
DIAGNOSTICS to check whether the EYE-Q
TM
is
functioning normally.