Filter
Top Products
Q-1500d Series Installation/Operation Manual 123
PRE
L
IMINAR
Y
7.1
Q-1500d Projector
Specifications
Table 7-3 lists the Q-1500d projector specifications.
7. Specifications
Table 7-1. Q-1500d Projector Specifications
Projector Type: Texas Instruments Digital Light Processing™ (DLP) dual
imaging system, SuperOnyx™ DMD™
Native Resolution: Full HD 1920 x 1080 (1080p)
Aspect Ratios: 4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema,
Native
DTV Compatibility: Refer to Table 7-2
Picture Size (16:9 Screen): Recommended Width: 72- 132 in.
Maximum Width: 200 in.
Processing: Runco DHD4 Processor with ViVix IV™ technology and BRiC
(Backup, Recovery and Clone) tool
Control Options: • Serial commands via RS-232
• Discrete infrared (IR) remote
• Consumer Electronics Control (CEC) protocol support via
HDMI
•Ethernet
Inputs: Refer to Table 7-3
12V Output (for anamorphic
lens transport):
+12 VDC, rated at 250 mA
Video Standards: NTSC, PAL, SECAM, CEA-861D
Calibration: ISF Certified Calibration Configuration
Color Gamut: Fully adjustable, > BT.709 (REC709)
Throw Distance
(Factor x Screen Width):
Refer to Table 3-3
Horizontal & Vertical Offset: Refer to Table 3-4
Light Output: CSMS Specifications* – Home Theater Calibration:
900 ANSI Lumens; 58 Foot-Lamberts (fL)
Uncalibrated: 1400 ANSI Lumens
Light output will drop less than 10% over the life of the
product.
*Measured on a 1.3 gain, 72" wide 16:9 screen
Contrast Ratio: CSMS* Contrast Ratio: 330:1
3 settings: Infinity:1, 20,000:1, and 10,000:1 (sequential)
ColorContrast™ for up to 50% higher contrast by color
Illumination System: InfiniLight™ LED (RGB) illumination system