Filter
Top Products
System Overview
14 Q-1500d Series Installation/Operation Manual
PRE
L
IMINAR
Y
The Video 2 and Video 3 inputs are not used with the Q-1500d. Connect your
Composite video sources to the Brightness Acceleration Engine.
10. HDMI 1 Input (Digital)
Connect the HDMI 1 input to the Primary HDMI output on the Brightness Acceleration
Engine.
The HDMI 2, HDMI 3 and HDMI 4 inputs are not used with the Q-1500d.
Connect your HDMI sources to the Brightness Acceleration Engine.
11. Ethernet
A female RJ-45 connector for wired network communications.
12. HDMI Out (Audio Only)
Connect this output to an audio control system to pass through HDMI audio.
13. HDMI Out (To Display)
Connect this to the HDMI input on the primary (top) optical engine on the Q-1500d
projector.
14. RS-232 (PC / Control)
A female, 9-pin D-sub connector for interfacing with a PC or automation/control
system.
The DHD Controller does not transmit HDMI CEC control
messages from the “HDMI Audio Out” connector.
Note