Filter
Top Products
Installation
34 Q-1500d Series Installation/Operation Manual
PRE
L
IMINAR
Y
Installing the Fixed
CineWide Base Plate
(Q-1500d/CineWide)
Q-1500d/CineWide with Whitney Anamorphic Lens: Figure 3-9 shows the Whitney
anamorphic lens base plate assembly for a Q-1500d/CineWide.
Figure 3-9. Q-1500d/CineWide with Whitney Anamorphic Lens Base Plate -
Exploded View
To install the Whitney anamorphic lens base plate on a Q-1500d/CineWide:
1. Place the projector upside down on a blanket or other soft, flat surface.
2. Remove the two front feet from the projector.
3. Place the CineWide base plate on the bottom of the projector as shown.
4. Secure the base plate to the projector with the four (4) supplied, M5 x 0.8 x 10mm
Phillips screws.
5. Re-attach the front feet to the projector.
➤
The Whitney anamorphic lens cannot be used with the
Q-1500d Ultra.
DO NOT OVER-TIGHTEN THE SCREWS.
Note
Screw, Phillips
Pan-Head,
M5-0.8 x 10mm (2x)
2
1
CineWide Base Plate
for Whitney Lens
Caution