Filter
Top Products
27
START UP
OPTIONS & STATUS CONFIGURATION
RESTORE
The Restore function restores a media server’s database and configurations using a previously
recorded backup from that hard drive. Restore is used only in case of a hardware failure.
After selecting Backup/Restore, make sure the external hard drive is connected to the USB or
FireWire port on the back of the SMS3. Select Restore. The media server will display
“Backup/Restore in progress” on the screen. Once the Restore procedure is complete, the SMS3 will
restart.
CONFIGURE
There are several “installer only” settings that should be reviewed during SMS3 installation. These set-
tings are accessed through the password (abc) protected “Configure” selection under Options &
Status.
The configuration options are: Encoding Format, Remote Control, Installer Options, Online Update and
Network Settings.