Samsung 400DX-2 Flat Panel Television User Manual


 
, → [0~9]
ID Setup
Assigns distinctive IDs to the SET.
ID Input
Use
to
select the transmitter functions of the individual SET. Only a SET where the ID
corresponds to the transmitter setting becomes activated.
MagicInfo
Available Modes
PC / DVI / BNC
AV
Component
HDMI
MagicInfo
Note
The
BNC mode will not be activated on the DXN-2 model.
MagicInfo supports the DXN-2 model only.
Note
The remote
control can be used to select MagicInfo. However, it is recommended to use
a separate USB keyboard to utilize MagicInfo fully.
For MagicInfo in Device mode, moving external devices while booting may cause errors.
Set up external devices only if the LCD Display turns on.
Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the
program (MagicInfo) may stop. If you do unplug the cable, restart the system.
Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the
program (MagicInfo) may stop.
To access other sources, press the SOURCE button in MagicInfo.
The preset password for the LCD Display is "000000".
The server program's Power-On option works only if the LCD Display's power is com-
pletely shut off.
Please make sure not to use the Power-On option when the LCD Display is in the process
of shutting down since this may cause system errors on the LCD Display.
When using MagicInfo with the MagicInfo Server Program: perform Network mode.
When using MagicInfo with the device directly connected to LCD Display : execute Device
mode.
Adjusting the LCD Display