Filter
Top Products
24 English
Setup
Initial Settings
Turn on your TV after connecting the player.1.
When you connect the player to a TV for the
first time, player turns on automatically and
the Initial Settings screen appears.
Press the ▲▼2. ◄► buttons to select the
desired language,
and then press the ENTER
button.
Press the 3. ENTER button to select
Start.
Press the ▲▼ buttons to select the desired 4.
TV Aspect Ratio, and then press the ENTER
button. (See page
26)
Press the 5. ▲▼ buttons to select the desired
Network Settings : Wired, Wireless (General),
WPS(PBC) or One Foot Connection, and
then press the ENTER button. If you do not
know the details of your Network Settings,
press the BLUE (D) button on your remote
instead to skip Network Settings here, finish
the Initial Settings, and go to the Home menu.
If you selected a Network Setting, go to
pages 31~35 for more information about the
Network settings. When done, go to Step 6.
The 6.
Home menu appears. (For more
information about the Home menu, please
see page
25.)
Home Menu•
✎
NOTE
When the player is connected to
▪
the TV for the first
time, the player turns on automatically. This is not
malfunction.
The
▪
Home menu will not appear if you do not
configure the initial settings except as noted below.
If you press the
▪
BLUE (D) button during the network
setup, you can access the
Home menu even if the
network setup is not completed yet.
If you want to display the Initial Setting screen again
▪
to make changes, select the Reset option.
(See page 36)
If you use an HDMI cable to connect the player to an
▪
Anynet+(HDMI-CEC)-compliant Samsung TV and
1.) You have set the Anynet+(HDMI-CEC) feature
to On in both the TV and the player and 2.) You have
set the TV to a language supported by the player,
the player will select that language as the preferred
language automatically.
If you leave the player in the stop mode for more
▪
than 5 minutes without using it,
a screen saver will
appear on your TV. If the player is left in the screen
saver mode for more than 20 minutes, the power
will automatically turn off.
d
PBC(WPS)
My Devices Internet Settings
Videos
Photos
Music
My Contents
Press the ▲▼
◄►
buttons to select
the
Initial Settings | On-Screen Language
m
Move
"
Enter
Select a language for the on-screen displays.
Български Hrvatski Čeština
Dansk Nederlands
English
Eesti keel Suomi Français
Deutsch Ελληνικά Magyar
Indonesia Italiano