Samsung BD-D7000/ZA Blu-ray Player User Manual


 
English 65
08 Appendix
PROBLEM SOLUTION
Forgot password •Press the STOP (
) button (on front panel) for more than 5 seconds with
no disc inside. All settings including the password will revert to the factory
settings.
Don’t use this unless absolutely necessary.
•When the factory default settings are restored, all stored user BD data is
deleted.
If you experience other problems. •Go to the contents and find the section of the user manual that contains the
explanations regarding the current problem, and follow the procedure once
again.
•If the problem still cannot be solved, please contact your nearest Samsung
authorized service center.
The picture is noisy or distorted •Make sure that the disc is not dirty or scratched.
•Clean the disc.
No HDMI output. •Check the connection between the TV and the HDMI jack of the player.
•
Check if your TV supports 480p, 720p, 1080i, 1080p HDMI input resolution.
Abnormal HDMI output screen. •If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
AllShare function
I can see folders shared through AllShare,
but I cannot see the files.
•AllShare shows only files corresponding to the Image, Music, and Movie
categories. Files that do not correspond to these categories may not be
displayed.
Video is played intermittently. •Check if the network is stable.
•Check if the network cable is properly connected and if the network is not
overloaded.
•The wireless connection between the DLNA compatible device and the
player is unstable.
Check the connection.
AllShare connection between player and PC
is unstable.
•The IP address under the same subnetwork should be unique. If they are
not, IP interference can cause this phenomenon.
•Check if you have a firewall enabled.
If so, disable the firewall function.