Filter
Top Products
18
General
Time Zone
You can specify the time zone that is
applicable to your area.
Support
Software Upgrade
The Software Upgrade menu allows you to
upgrade the player’s software for performance
improvements or additional services.
By Online
To upgrade By Online, follow these steps:
1. Select By Online, and then press the
ENTER button. The Connecting to Server
message appears.
2. A popup message will appear if an update
is available.
3. If you select Yes, the player will turn off
automatically before restarting.
(Never turn the player on during an
upgrade.)
4. The update progress popup will appear.
When the update is completed, the player
will turn back off automatically.
5. Press the POWER button to turn on the
player.
✎
NOTE
▪
The Update is complete when the player turns
off after restarting. Press the POWER button to
turn on the updated player for your use.
▪
Never turn the player off or back on manually
during the update process.
▪
Samsung Electronics shall take no legal
responsibility for player malfunction caused by
an unstable Internet connection or consumer
negligence during a software upgrade.
▪
If you want to cancel the upgrade while the
upgrade software is downloading, press the
ENTER button.
By USB
To upgrade by USB, follow these steps:
1. Visit www.samsung.com/bluraysupport.
2. Download the latest USB software
upgrade zip archive to your computer.
3. Unzip the zip archive to your computer.
You should have a single RUF file with the
same name as the zip file.
4. Copy the RUF file to a USB flash drive.
5. Make sure there is no disc in the player,
and then insert the USB flash drive into the
USB port of the player.
6. In the player’s menu, go to Settings >
Support > Software Upgrade.
7. Select By USB.
✎
NOTE
▪
No disc should be inserted in the product when
you upgrade the software using the USB Host
jack.
▪
When the software upgrade is done, check the
software details in the software Upgrade menu.
▪
Do not turn off the player during the software
upgrade. It may cause the player to malfunction.
▪
Software upgrades using the USB Host jack
must be performed with a USB flash memory
stick only.
Auto Upgrade Notification
If you have connected the player to your
network, and then set Auto Upgrade
Notification on, the player automatically
notifies you when a new software version is
available for the player.
To set Auto Upgrade Notification on, follow
these steps:
1. Select Auto Upgrade Notification, and
then press the ENTER button.
2. Use the
▲▼ buttons to select
On, and then
press the ENTER button.
If there is a new software version available,
the player notifies you with a popup message.
1. To upgrade the firmware, select Yes on the
Pop-up. The player turns off automatically,
then restarts, and begins the download.
(Never turn on the player manually here.)
2. The update progress popup appears.
3. When the update is complete, the player
turns off again automatically.
4. Press the POWER button to turn on the
player.
✎
NOTE
▪
Update is complete when the player turns off
after restarting. Press the POWER button to turn
on the updated player for your use.
Never turn the player off or on manually during
the update process.
▪
Samsung Electronics shall take no legal
responsibility for player malfunction caused by
an unstable Internet connection or consumer
negligence during software upgrade.
Contact Samsung
Provides contact information for assistance
with your player.
Terms of Service Agreement
View the general disclaimer regarding third
party contents and services.
Reset
All settings will revert to the default except for
the network settings.